Throttle Cable Bracket

Fabricated bracket for mounting throttle cable to on the engine side.

Brakes

Bled the brakes and hooked up the brake pedals.

Front wheel maintenance

Installed new tire and tube on front wheel and cleaned and re-greased bearings.

Fuel Vent Manifold

Finished installing and plumbing the fuel vent manifold.

Throttle Quadrant

Re-made a mount for the new throttle quadrant with aluminum plate and installed throttle quadrant.

Wiring

Finished wiring the GRT EIS and wired power to fuel probes.

Wiring

Did only a little wiring to day, hooking up more probes to the EIS.

Engine Conversion to Fixed Pitch

Finished converting the engine to use a fixed pitch prop.  Had a "Never Again" experience using some Harbor Freight hex sockets.  The tip of it sheared off instantly when I started to back out the pipe plug that's buried over a foot inside the crankshaft.  Luckily I was able to get the broken tip out of the plug and try again with a Sears Craftsman set of hex sockets that I ran out and bought, which worked like a charm.  I'll never use a cheap tool again on something I care about.