Sunday, October 30, 2016

Canopy Emergency Release

Created removable hinge pins from piano wire to allow someone to open the canopy from the outside in case of emergency.

Sunday, October 23, 2016

Fuel Gauge Marking & Flow Test

Ordered up some fuel delivery and marked the tanks in 5Gal increments.  Performed all the fuel flow tests to ensure adequate fuel delivery.

Friday, October 21, 2016

Cowl Heat Shield

Used adhesive backed foil for heat shields on the cowl where the exhaust pipes run.  Used an added layer of fiberfrax where the clearance was less than 1/2".

Saturday, October 15, 2016

Cowling Primer

Primed up the cowl and misc. pieces.